Kratky System

There are six main types of hydroponic systems to choose from:

• Kratky System
• Deep Water Culture (DWC)
• Nutrient Film Technique (NFT).
• Ebb and Flow (Flood and Drain)
• Aeroponics
• Drip Systems

Kratky System

A Hydroponic Kratky System is the most basic type of hydro system you can build. It’s been used for many years.

Plant roots are 30% to 40% dipped into nutrient-rich water through net cups (please see the reference video). This is the most basic non-recirculating hydroponic system that does not require electricity, air pumps or any kind of water circulation pumps.

Key to success with this system and all other systems is to check the pH level and EC and top-up the water/nutrient when required. Also, always note the amount of top-up water.

Make sure to change/clean the container of nutrient-rich water when top-up water volume is become more than 50% of the total volume of nutrient-rich container.

Deep Water Culture (DWC) Systems

Deep water culture, which I will refer to as DWC from here on out, is hands-down the easiest type of hydro system to use.​

How a Deep Water Culture (DWC) system works.

In a DWC system, you use a reservoir to hold a nutrient solution. The roots of your plants are suspended in that solution so they get a constant supply of water, oxygen, and nutrients.

To oxygenate the water, you use an air pump with an air stone to pump bubbles into the nutrient solution. This prevents your roots from drowning in the water — a weird thing to think about, but it can (and does) happen to many beginner hydroponic gardeners.

Your plants are typically housed in net pots that are placed in a foam board or into the top of the container that you’re using for your reservoir. With some hydroponic growing media added into your net pots, they provide a home for the very beginning of your root system and plant stems.​​

Nutrient Film Technique (NFT) Systems

The Nutrient Film Technique, which I will refer to as NFT, is a popular commercial hydroponic system.​

The simplest way to set up a NFT system.

Plants are grown in channels that have a nutrient solution pumping through them and constantly running along the bottom of the channel. When the solution reaches the end of the channel, it drops back into a main reservoir and is sent back to the beginning of the system again. This makes it a recirculating system, just like deep water culture.

Unlike deep water culture, your plants roots are not completely submerged in a NFT system — hence the “film” part of the system’s name.

Plants are placed in these channels using net pots and growing medium and can be replaced or harvested on a one-by-one basis. ​

Ebb and Flow / Flood and Drain Systems

Ebb and Flow systems, which are also known by the name Flood and Drain, are a less-commonly seen system. But they’re still quite effective and can be the best choice depending on your situation.

Unlike the previous two hydro systems we have covered, an ebb and flow system does not expose the roots of your plants to nutrient solution on a constant basis.

Instead, you grow in a tray filled with a growing medium. The tray is “flooded” with your nutrient solution a few times per day, depending on factors like:

• The size of your plants
• The water requirement of your plants
• The air temperature
• Where your plants are in their growth cycle
• …And many more

Flooding is accomplished by using a reservoir below the tray, a water pump, and a timer to schedule the flooding cycle.

After the tray is flooded, gravity drains the solution back down into the reservoir, where it is being oxygenated by an air pump and air stone. It sits there waiting for the next flood cycle, and the process goes on.

Hydroponic growers choose ebb and flow systems for their flexibility. Most of them will fill the tray with a growing medium of their choice and also add net pots to organize their plants and control the roots a bit more.

Aeroponics Systems

Aeroponic systems are the most “high-tech” hydroponic setups that you can build. But they’re not that complex once you understand how they work.​

A simple aeroponic system you can build at home.

An aeroponic system is similar to a NFT system in that the roots are mostly suspended in air. The difference is that an aeroponic system achieves this by misting the root zone with a nutrient solution constantly instead of running a thin film of nutrient solution along a channel.

Some growers prefer to mist on a cycle like an ebb and flow system, but the cycle is much shorter, typically only waiting a few minutes between each misting. It’s also possible to mist on a continual basis and use a finer sprayer to ensure more oxygen gets to the root zone.

Aeroponic systems have been shown to grow plants even quicker than some of the simpler systems like deep water culture, but this has not been verified to be true in all cases. If you want to experiment with this system, you will need specialized spray nozzles to atomize the nutrient solution.

Drip Systems

Drip systems are extremely common in commercial operations, but less common in recreational gardens. This is because they’re simple to operate a a large scale, but slightly overkill for a smaller garden. Regardless, they’re a great way to grow hydroponically that you should consider.​

A basic hydroponic drip system.

Benefits of Drip Systems